FAQFAQ SearchSearch MemberlistMemberlist  RegisterRegister  ProfileProfile Log in to check your private messagesP.M. Log inLog in
pbs or c-hub conversion. which one is better

 
Post new topic   Reply to topic    OFNA Nitro Talk Back Forum Forum Index -> Mutilator Truggy
View previous topic :: View next topic  

Author Message
discgolferlee



Joined: 26 Nov 2007
Posts: 28

PostPosted: Mon Mar 10, 2008 2:03 pm    Post subject: pbs or c-hub conversion. which one is better Reply with quote

which should I get for my mutilator? I was going to get pbs but then I heard people saying the pillow ball studs pull out of the arms easily. I also read nitrohouse has a c-hub conversion as well. Both conversion kits cost about 68 bucks from nitrohouse. So which should I get and why. any help appreciated. thanks.
Back to top
View user's profile Send private message
Author Message
DJ



Joined: 22 Jun 2006
Posts: 979

PostPosted: Tue Mar 11, 2008 8:46 am    Post subject: Reply with quote

40144 conversion kit worked for me and I like driving my Mutilator now.Combo that with 16mm big bore shocks and you got a good ride blue springs to go with that shake
Back to top
View user's profile Send private message
Author Message
socalbash



Joined: 20 Oct 2005
Posts: 2803

PostPosted: Tue Sep 02, 2008 7:38 am    Post subject: Reply with quote

OFNA Twin Titan PBS conversion - nice n wide. My latest Muti project.









Back to top
View user's profile Send private message
Author Message
socalbash



Joined: 20 Oct 2005
Posts: 2803

PostPosted: Tue Sep 02, 2008 9:06 am    Post subject: Re: pbs or c-hub conversion. which one is better Reply with quote

discgolferlee wrote:
which should I get for my mutilator? I was going to get pbs but then I heard people saying the pillow ball studs pull out of the arms easily. I also read nitrohouse has a c-hub conversion as well. Both conversion kits cost about 68 bucks from nitrohouse. So which should I get and why. any help appreciated. thanks.


Ive run the pbs from ofna on a multitude of their vehicles - my tin titan is a 12+ pound truck and Ive beat the snot out of it - never seen a pivot ball pull out from the front or rear knucks. Have snapped a front knuckle once. Rare though. We beat these things pretty hard man. PBS is tuff.

I like the weight savings of the c-hub.

Id like ot see DJ's Jammin CRT conversion setup.
Back to top
View user's profile Send private message
Author Message
jaz240



Joined: 31 Dec 2005
Posts: 271
Location: Gilbert, AZ

PostPosted: Wed Sep 03, 2008 10:42 am    Post subject: Reply with quote

Be advised that while PBS has many wonderful aspects and advantages, it also requires constant maintenance. Pivot balls and the housings, and the end caps need to be regularly disassembled, cleaned, polished, and lubed for you to get the most out of them, also be careful threading the Nuts into the plastic housings of the Pivot Knuckles, as they will miss thread easily. Also you need to pay attention to how far you screw down the Knuckle nuts, too far and you get binding, too little and they will interfere with your wheels. I had enough with Pivot balls, and was very happy to be rid of them.
Back to top
View user's profile Send private message Visit poster's website
Author Message
socalbash



Joined: 20 Oct 2005
Posts: 2803

PostPosted: Wed Sep 03, 2008 8:52 pm    Post subject: Reply with quote

Jaz240 ... wow ...

I really dont find all that much drama in running a pbs car.

Quote:
Also you need to pay attention to how far you screw down the Knuckle nuts, too far and you get binding, too little and they will interfere with your wheels.


that part is really minor effort.
Back to top
View user's profile Send private message
Author Message
jaz240



Joined: 31 Dec 2005
Posts: 271
Location: Gilbert, AZ

PostPosted: Wed Sep 03, 2008 8:59 pm    Post subject: Reply with quote

socalbash wrote:
Jaz240 ... wow ...

I really dont find all that much drama in running a pbs car.

Quote:
Also you need to pay attention to how far you screw down the Knuckle nuts, too far and you get binding, too little and they will interfere with your wheels.


that part is really minor effort.


Which vehicle did you run em on. The hyper 7 PBS set up is wide open on the backside, front. I had to clean em, after every race, they just loaded up with dirt on me, and i could here the dirt crunching when I turned the wheels. If I neglected them, I definitely lost turning radius and speed, so I stayed on top of it. all part of the game, but I'm just happy my new C-hubs need that much less attention. Maybe some other vehicles have some sort of boot on the backside to keep the dirt out, but not the H7
Back to top
View user's profile Send private message Visit poster's website
Author Message
H8



Joined: 09 May 2006
Posts: 524
Location: Perth, Western Australia

PostPosted: Wed Sep 03, 2008 9:53 pm    Post subject: Reply with quote

On my PBS Hyper 7, I used to use mountain bike teflon-based lube on the balls at the start of the day. Seemed to last all day because not being sticky, it doesn't attract any gunk. PBS is good because it gives more all round movement, but does require more maintenance than C-hubs in a racing environment.
Back to top
View user's profile Send private message
Author Message
jaz240



Joined: 31 Dec 2005
Posts: 271
Location: Gilbert, AZ

PostPosted: Thu Sep 04, 2008 5:13 am    Post subject: Reply with quote

I am by no means bashing PBS. I loved it also, I was just letting discgolfer know that it requires more attention than standard C-hub. Some people don't like the cleaning and maintenance that come with this hobby. Some people love taking their unidentifiable pile of dirt, and polishings it back up to a brand new looking Ride. If discgolfer is not into the cleaning and lubing, and disassembling part of the hobby, he might want to stick with the C-hubs
Back to top
View user's profile Send private message Visit poster's website
Author Message
Galang



Joined: 19 Sep 2017
Posts: 27

PostPosted: Tue Sep 19, 2017 10:24 pm    Post subject: Tes Reply with quote

5.2.1.1 1.Loncatan InduktifDistributor plat besi hitam
Distributor plat besi hitam
undangan pernikahan bentuk tas
Distributor plat kapal besi baja
Agen besi beton interworld steel is
undangan pernikahan modern
Toko Plat Bordes Kembangjual besi baja online jualbesibajaonline.com jualbesibajaonline supplier besi wf supplier besi h beam supplier besi cnp supplier besi unp supplier besi beton supplier besi plat supplier besi siku supplier pipa besi agen besi wf agen besi h beam agen besi cnp agen besi unp harga besi beton harga besi plat harga besi siku agen pipa besi besi wf besi h beam besi beton besi cnp besi unp besi plat besi siku besi pipa Jual besi baja plat astm a 283 grade a 285 grade c 70 c a 516 grade 70 harga distributor jakarta surabaya
Jual Harga Distributor Wear Plate Tahan Gesek Hardox 400 450 500
Jual Harga Distributor Wear Plate Tahan Gesek Abrex 400 450 500 Harga Jual Distributor Plat Boiler Tahan Panas Astm A 516 GR 70 Jual Harga Distributor Plate Boiler Tahan Panas Astm A 283 Gr c Distributor Plat Boiler Tahan Panas astm a 285 gr c Harga Jual Murah Disini Distributor Plat Tahan Gesek Waear Plate Creusabro 4800 8000 Harga Jual murah Harga Jual Distributor Pipa Boiler DIN 17175, EN 100126 P235 GH Vallorec, Sumitomo dan Benteler
konstruksi baja jasa konstruksi
konstruksi bangunan jasa konstruksi besi baja
konstruksi jembatan jasa konstruksi gudang
konstruksi baja wf jasa konstruksi gedung
harga konstruksi baja per m2 jasa konstruksi baja wf
konstruksi kapal jasa konstruksi jembatan
konstruksi cakar ayam jasa konstruksi bangunan
contoh konstruksi baja wf jasa konstruksi
konstruksi jembatan beton jasa konstruksi besi baja
konstruksi bangunan 2 lantai jasa konstruksi gudang
undangan pernikahan simple
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    OFNA Nitro Talk Back Forum Forum Index -> Mutilator Truggy All times are GMT - 9 Hours
Page 1 of 1
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
ofna nitro talk back