 |
 |
|
 |
|
| Author |
Message |
wheruat
Joined: 26 Jan 2009
Posts: 7
Location: Los Angeles Cali
|
 Posted: Tue Jan 27, 2009 7:58 am Post subject: |
 |
|
| DJ or Anyone - Had a question just picked up an OS.18tz with pull start ( tower sent the wrong unit ) I see that the shaft if shorter and someother things was wondering if you could help me out by letting me know what parts i need to install this motor into the CRT.5. I looked around but didnt see anything just seen a few pix. Thx for the help in advance |
|
| Back to top |
|
|
|
 |
|
 |
|
|
|
|
| Author |
Message |
DJ
Joined: 22 Jun 2006
Posts: 979
|
| Posted: Wed Jan 28, 2009 8:57 am Post subject: |
|
|
| if it's an Sg crank and needs to be longer then use part numbers 10410 or 10099 shim kits they would make your crank longer, Os engine that's some big power a wheel spinner then, you might want to think about having a .12 engine for racing because that .18 you might have to pedal the throttle to keep it under control on the track. |
|
| Back to top |
|
|
|
|
|
|
|
|
|
|
| Author |
Message |
wheruat
Joined: 26 Jan 2009
Posts: 7
Location: Los Angeles Cali
|
| Posted: Wed Jan 28, 2009 9:12 am Post subject: |
|
|
| DJ- thx for the reply yah i was gonna use the .18tz for bashing around the yard. the motor that tower sent me was the wrong one. i ordered the slide carb and non-pull start but they sent me the pull start with rot. carb. they dont have the non pull in stock so they said they would send me the slide carb for free but like you said the shaft on it looks little short then the stock jammin .12 i have in it. thx ill look into those parts # |
|
| Back to top |
|
|
|
|
|
|
|
|
|
|
| Author |
Message |
wheruat
Joined: 26 Jan 2009
Posts: 7
Location: Los Angeles Cali
|
| Posted: Tue Feb 17, 2009 8:39 pm Post subject: |
|
|
| Ok peeps well i was a little drunk the other nite and ordered some shock for the rear on the CRT.5 but my dumba*** got the super big bore 16mm instead of the just the big bore guys! The other problem i already put them together!! Is there any way that i can still use these Super Big Bore Shock for the rear. What else besides the DM1 shocks work for the front. Cant seem to find the DM1's thx |
|
| Back to top |
|
|
|
|
|
|
|
|
|
|
| Author |
Message |
DJ
Joined: 22 Jun 2006
Posts: 979
|
| Posted: Wed Feb 18, 2009 8:32 am Post subject: |
|
|
| you probably can but you would need to cut out the rear of the body and get longer shock standoffs 41010 and you would need to use the front shock to go on the rear of the .5 |
|
| Back to top |
|
|
|
|
|
|
|
|
|
|
| Author |
Message |
wheruat
Joined: 26 Jan 2009
Posts: 7
Location: Los Angeles Cali
|
| Posted: Wed Feb 18, 2009 9:38 am Post subject: |
|
|
| DJ- Thx for the reply. Yah im using the Super Big Bore 16mm for the rear i cut about 5.5 off the springs and its not to bad. For the front shocks i see everyone doing the DM-1 shocks but cant seem to find a kit only parts. Do you know of any other shocks that would work good for the guy! thx for all your help!! |
|
| Back to top |
|
|
|
|
|
|
|
|
|
|
| Author |
Message |
JamminREX
Joined: 23 Feb 2009
Posts: 1
Location: Idaho
|
| Posted: Sun Mar 15, 2009 10:16 pm Post subject: CRT.5 |
|
|
| So I have a question? Tower is discontinuing most .5 parts is the CRT.5 going away or is a new one on the way? HOPE it is going to be aroud for a long time to come!!!!!! |
|
| Back to top |
|
|
|
|
|
|
|
|
|
|
| Author |
Message |
wheruat
Joined: 26 Jan 2009
Posts: 7
Location: Los Angeles Cali
|
| Posted: Mon Mar 16, 2009 6:06 am Post subject: |
|
|
| JamminREX- go to nitrohouse.com they have parts in stock and have great service and shipping is fast. |
|
| Back to top |
|
|
|
|
|
|
|
|
|
|
| Author |
Message |
nitro guy
Joined: 20 Jan 2009
Posts: 13
Location: whittier,CA
|
| Posted: Sun Mar 22, 2009 10:21 pm Post subject: |
|
|
| so i have a question when do you guys race the .5 in socal i will like to get in this class any one know maybe you DJ,rob |
|
| Back to top |
|
|
|
|
|
|
|
|
|
|
| Author |
Message |
sebtarta
Joined: 10 Jun 2009
Posts: 1
|
| Posted: Wed Jun 10, 2009 8:44 am Post subject: |
|
|
Hopefully everyone is still around.
Hello all! Just bought the CRT .5 from ebay for a great price, and a friend of mince got the RTR from AmainHobbies.
Cannot wait till we get it.
Anyone know any tire combination for on road use? |
|
| Back to top |
|
|
|
|
|
|
|
|
|
|
| Author |
Message |
GTSLOW
Joined: 22 Feb 2010
Posts: 3
|
| Posted: Mon Feb 22, 2010 10:27 am Post subject: |
|
|
| If towers dropping parts then what are some common things to stock up on? Last thing I wanna do is be stuck on trying to find replacement parts. |
|
| Back to top |
|
|
|
|
|
|
|
|
|
|
| Author |
Message |
GTSLOW
Joined: 22 Feb 2010
Posts: 3
|
| Posted: Mon Feb 22, 2010 10:30 am Post subject: |
|
|
| Anyone using a start box? Which ones will work with the mini? |
|
| Back to top |
|
|
|
|
|
|
|
|
|
|
| Author |
Message |
Geralt
Joined: 16 Mar 2011
Posts: 1
|
| Posted: Wed Mar 16, 2011 10:46 pm Post subject: |
|
|
| Has the crt .5 been discontinued? |
|
| Back to top |
|
|
|
|
|
|
|
|
|
|
| Author |
Message |
Srvoodoo
Joined: 10 May 2011
Posts: 3
Location: Allentown, Pa.
|
| Posted: Wed May 11, 2011 2:52 am Post subject: |
|
|
| Geralt wrote: |
| Has the crt .5 been discontinued? |
Nope you can still get 'em 
...and the little blue bumpbox is made for them. can be found
for about $40 US.
  |
|
| Back to top |
|
|
|
|
|
|
|
|
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
|
|
|
|
|
FAQ 
Search 
Memberlist
Register
Profile 
P.M. 
Log in
