OFNA Nitro Talk Back Forum :: View topic



	FAQ Search Memberlist Register Profile P.M. Log in

26max gone crazy

OFNA Nitro Talk Back Forum Forum Index -> Picco Engines

View previous topic :: View next topic

Author

Message

rone1

Joined: 25 Jun 2011
Posts: 1

Posted: Sat Jun 25, 2011 5:15 am Post subject: 26max gone crazy

what guys im am about to give up i put a 26max im my revo and got the high idle from the front bearing i put a boca bearig in it sealed the carb and have no air leak and now it will not start unless i turn in the idle srcew almost all the way in i tried the factory setting and it only tries to start for bout 2sec then dies iv tried everything with no results do anyone have some ideal for me like i said it will only try to run with the idle srcew almost all the way in

Author

Message

VWVR6_T

Joined: 23 Aug 2009
Posts: 384
Location: Western, PA

Posted: Mon Jun 27, 2011 5:01 am Post subject:

Turn the LS and HS to flush. SEt up the idle gap to @ .5-.7mm (credit card thick) warm it up in the box and set the LS until engine is steady. At this point do not touch the idle gap for nothing,no need to touch it again. Runs the car for a few laps a nd bring it home and adjust the HS if is too rich, adjust 1hr at a time and run it. Remember if you lean the HS you need to listen the the idle, if idle rise then rich the LS until is steady(all that it take is just a little touch at a time). Hope this help.

Display posts from previous:

	OFNA Nitro Talk Back Forum Forum Index -> Picco Engines	All times are GMT - 9 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum