OFNA Nitro Talk Back Forum :: View topic



	FAQ Search Memberlist Register Profile P.M. Log in

New DM-1 Spec Pro

OFNA Nitro Talk Back Forum Forum Index -> 1:8 Electric Sedan

View previous topic :: View next topic

Author

Message

whipnet

Joined: 28 Aug 2010
Posts: 4

Posted: Wed Nov 03, 2010 4:27 pm Post subject: New DM-1 Spec Pro

Well I got my DM-1 S in finally (man I love the smell of new RC) I am getting the Tekno conversion for it and have a couple of questions if you guys don't mind. 1 - I thought I read where the Tekno conversion chassis is shorter than the stock one. Is this true? And if so will the lid that came with it fit, or will I need to get another one? 2 - Do you guys keep the 2 speed or ditch it for a 1 speed. Can you lock it so reverse is possible? 3 - I would be interested in the speed and torque you guys are using for servos. 4 - And are the mechanical brakes preferred on these? I appreciate any help you guys might have as I am new to the pavement. Thanks in advance *

Author

Message

David S.

Joined: 04 Apr 2008
Posts: 375

Posted: Thu Nov 04, 2010 7:24 am Post subject:

The tekno chassis is the same length as the stock chassis I have run only with the 2 speed. Servo 205 in/oz .12 sec @6.0 vt Mechanical brakes are a must when using a 2spd. otherwise you have no brakes. Hope this helps

Author

Message

whipnet

Joined: 28 Aug 2010
Posts: 4

Posted: Tue Nov 09, 2010 8:00 pm Post subject:

Thanks for the info David. Very helpful. *

Display posts from previous:

	OFNA Nitro Talk Back Forum Forum Index -> 1:8 Electric Sedan	All times are GMT - 9 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum