FAQFAQ SearchSearch MemberlistMemberlist  RegisterRegister  ProfileProfile Log in to check your private messagesP.M. Log inLog in
GTP 2 speed tranny
Goto page 1, 2  Next
 
Post new topic   Reply to topic    OFNA Nitro Talk Back Forum Forum Index -> On-Road Lounge
View previous topic :: View next topic  

Author Message
stylze 1



Joined: 27 Jul 2008
Posts: 4
Location: CT

PostPosted: Sun Jul 27, 2008 8:11 am    Post subject: GTP 2 speed tranny Reply with quote

I have a 2003 GTP wit a 2 speed tranny, at the end of the clutch bell where the screw holds the bell onto the crank shaft ,wore away so theres no way to hold the bell onto the shaft, now where can I find just a 2 speed bell without having to buy the whole tranny. Can someone please let me know I will be very greatful, thankyou.
Back to top
View user's profile Send private message
Author Message
DJ



Joined: 22 Jun 2006
Posts: 979

PostPosted: Wed Jul 30, 2008 1:06 pm    Post subject: Reply with quote

here are the part number you need and you can get them from Nitrohouse 800-928-0304

35253 18tooth second gear

35238 14tooth first gear

35242 clutch bell

35958 5x8mm bearing

34110 5x10mm bearing

10099 shim kit
Back to top
View user's profile Send private message
Author Message
stylze 1



Joined: 27 Jul 2008
Posts: 4
Location: CT

PostPosted: Wed Jul 30, 2008 4:17 pm    Post subject: Reply with quote

Thanks for the the info my friend.
Back to top
View user's profile Send private message
Author Message
Dohner



Joined: 30 Sep 2010
Posts: 19

PostPosted: Fri Oct 01, 2010 4:00 pm    Post subject: Reply with quote

Got a questoin for you!! When is a GTP-2 suppose to shift into second??
Back to top
View user's profile Send private message
Author Message
VWVR6_T



Joined: 23 Aug 2009
Posts: 383
Location: Western, PA

PostPosted: Fri Oct 01, 2010 4:25 pm    Post subject: Reply with quote

You adjust the tranny to shift when ever you want it or need it.
Back to top
View user's profile Send private message
Author Message
Dohner



Joined: 30 Sep 2010
Posts: 19

PostPosted: Fri Oct 01, 2010 4:37 pm    Post subject: Reply with quote

Ok how do you do that and when do you want it to shift i am going to be trying to run with a Traxxas Jato 3.3
Back to top
View user's profile Send private message
Author Message
VWVR6_T



Joined: 23 Aug 2009
Posts: 383
Location: Western, PA

PostPosted: Fri Oct 01, 2010 5:02 pm    Post subject: Reply with quote

Take a look at this manual if you have the chance print this out because you are going to use it http://www.ofna.com/pdf/34317-GTP-2-RTR-MANUAL.pdf. Now the second link is for just the tranny http://www.ofna.com/pdf/8-Cam-2speed.pdf. Look in this diagram for an ilustration that said "Comes pre-assembled." on the very beginin, the 4 x 4mm set screw is the one that you are going to use to adjust the reaction of the tranny, you can make it shift early or you can make it shift late how ever you like the must. You can adjust one hr at a time so you can see how the tranny change where shift. All this information is here in this website just need to look around, here is the link http://www.ofna.com/manuals.html. Here is an other link that show you different topics http://www.ofna.com/forum/viewforum.php?f=23. Feel free to ask. hope this help.
Back to top
View user's profile Send private message
Author Message
Dohner



Joined: 30 Sep 2010
Posts: 19

PostPosted: Fri Oct 01, 2010 5:33 pm    Post subject: Reply with quote

OK and do any of you know what the top speed is on a pretty much stock GTP-2 Thanks
Back to top
View user's profile Send private message
Author Message
VWVR6_T



Joined: 23 Aug 2009
Posts: 383
Location: Western, PA

PostPosted: Fri Oct 01, 2010 5:37 pm    Post subject: Reply with quote

With the correct set up can go over 40MPH easy. I seen this 1/8 cars go over 60mph its up to the engine,pipe,gear ratios, etc. to make it happen.
Back to top
View user's profile Send private message
Author Message
Dohner



Joined: 30 Sep 2010
Posts: 19

PostPosted: Fri Oct 01, 2010 5:40 pm    Post subject: Reply with quote

Ok thanks i was hoping for 65 or so my buddys jato is 65 out of the box.
Back to top
View user's profile Send private message
Author Message
VWVR6_T



Joined: 23 Aug 2009
Posts: 383
Location: Western, PA

PostPosted: Fri Oct 01, 2010 5:42 pm    Post subject: Reply with quote

Can be posible, just need a good engine tune and set up with a high % of nitro, I bet you can out run the jato.
Back to top
View user's profile Send private message
Author Message
Dohner



Joined: 30 Sep 2010
Posts: 19

PostPosted: Sat Oct 02, 2010 8:28 am    Post subject: Reply with quote

OK thats more like what i want to hear LOL and those links did not open up for can you try them again I would appricate it
Back to top
View user's profile Send private message
Author Message
VWVR6_T



Joined: 23 Aug 2009
Posts: 383
Location: Western, PA

PostPosted: Sat Oct 02, 2010 10:50 am    Post subject: Reply with quote

Don't know what happen, anyway, go to the main page of OFNA and look the righ side of the screen and look for instruction manuals scroll down and look for 2 speed, cam. The next one is in the same section on top under Ultra GTG RTR. The last link was in the forum look for on road section you will see the DM & GTP threads section.
Back to top
View user's profile Send private message
Author Message
Dohner



Joined: 30 Sep 2010
Posts: 19

PostPosted: Sun Oct 03, 2010 3:25 pm    Post subject: Reply with quote

OK i was adjusting the tranny today to shift but still no shift. How far can i adjust that set screw out before it falls out. LOL dont need that.
Back to top
View user's profile Send private message
Author Message
VWVR6_T



Joined: 23 Aug 2009
Posts: 383
Location: Western, PA

PostPosted: Sun Oct 03, 2010 4:30 pm    Post subject: Reply with quote

if you loose the screw will shift early if adjust the screw will shift later in the RPM, so you need to adjust, do it one to two hr at a time. Right now you maybe running in secong gear, lol. Let me know
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    OFNA Nitro Talk Back Forum Forum Index -> On-Road Lounge All times are GMT - 9 Hours
Goto page 1, 2  Next
Page 1 of 2
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
ofna nitro talk back