slickrick
Joined: 26 Jul 2010
Posts: 2
Location: St.Charles,Mo
|
 Posted: Mon Aug 02, 2010 7:47 pm Post subject: Leaking problem on the .28 force motor and problem |
 |
|
Hi everybody, i just recently bought this Lx-1 and have started to figure it out but now it looks like i have gas leaking or something right where the head bolts on to the engine case. I was gonna replace the shims in ther or the head button. Any ideals? Its in the Force .28 motor. I have already upgraded the starter system and the servo's. Any help would be greatly appriciated. Thanks rick this is leaking all towards the back of the engine where the exhaust manifold comes out of the motor so any help on this would be nice.
----------
-----------------
----------------------
Cool, thanks now its not leaking but i set the carb back at baseline so i can tune this correctly but its like opening up wide open and it won't idle. i just put a clutch set up in it? Any ideas what the problem is?
Last edited by slickrick on Tue Aug 03, 2010 3:56 pm; edited 1 time in total |
|
FAQ 
Search 
Memberlist
Register
Profile 
P.M. 
Log in
