FAQFAQ SearchSearch MemberlistMemberlist  RegisterRegister  ProfileProfile Log in to check your private messagesP.M. Log inLog in
Gearing help

 
Post new topic   Reply to topic    OFNA Nitro Talk Back Forum Forum Index -> Jammin 1:10 Electric SC
View previous topic :: View next topic  

Author Message
JSU101



Joined: 15 Jun 2012
Posts: 2
Location: Jacksonville Florida

PostPosted: Fri Jun 15, 2012 9:07 am    Post subject: Gearing help Reply with quote

I picked up a SCRT10 Jammin. It has a Tekin RX8 and i put a Viper 5.5 3700 kv 550. The truck has a 46 tooth spur and 2 cell. I tried a 13 and top speed is about 20mph i went up to a 17 and its about 25mph but seems to build heat in the motor faster. Havent ran it long enough to see what temps its getting to. In 5 mins of run time in the street its 120 Deg. So what way should i go with this.
Back to top
View user's profile Send private message Send e-mail
Author Message
David S.



Joined: 04 Apr 2008
Posts: 422

PostPosted: Mon Jun 18, 2012 6:50 am    Post subject: Reply with quote

What temp is the speed control at? After 3min? After 5Min?
Wht temp is the motor at after 3min? after 5min?
Back to top
View user's profile Send private message
Author Message
JSU101



Joined: 15 Jun 2012
Posts: 2
Location: Jacksonville Florida

PostPosted: Thu Jun 21, 2012 10:38 am    Post subject: Reply with quote

3Mins esc 100
3mins motor 122

5mins esc 110
5mins motor 158
Back to top
View user's profile Send private message Send e-mail
Author Message
David S.



Joined: 04 Apr 2008
Posts: 422

PostPosted: Fri Jun 22, 2012 6:12 am    Post subject: Reply with quote

Temps look pretty good. Looks like you can go larger on the pinion. On mine the Novak 4.5 motor temp after 5 min is 110 and the esc is 165.
You can consult with Tekin and see what they recomend as a max temp for their esc.
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    OFNA Nitro Talk Back Forum Forum Index -> Jammin 1:10 Electric SC All times are GMT - 9 Hours
Page 1 of 1
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
ofna nitro talk back