FAQFAQ SearchSearch MemberlistMemberlist  RegisterRegister  ProfileProfile Log in to check your private messagesP.M. Log inLog in
What is wrong?

 
Post new topic   Reply to topic    OFNA Nitro Talk Back Forum Forum Index -> Hyper 8 & 8.5 Pro & RTR
View previous topic :: View next topic  

Author Message
alport78



Joined: 30 Nov 2009
Posts: 13

PostPosted: Sat Mar 20, 2010 10:43 pm    Post subject: What is wrong? Reply with quote

I bought a used hyper8 chassis but it's problems never end That will be my last used chassis!
My front cvd's come off from the diff cups on every run. I replaced front lower and upper a-arms with original new ones. I upraded the steering knuckle with cnc. I can't figure out where the problem is. My front CVD's look like made for a shorter distance. front camber is -2 .Any opinion will be much appreciated. Here is a picture of it.
[/img]
Back to top
View user's profile Send private message
Author Message
alport78



Joined: 30 Nov 2009
Posts: 13

PostPosted: Mon Mar 22, 2010 1:55 am    Post subject: Reply with quote

Could the universal has been replaced with wrong item before I bought it? My universals are a little thicker on the middle with three circles around the thicker part if it helps..
Back to top
View user's profile Send private message
Author Message
Ben Giles



Joined: 31 Aug 2008
Posts: 22
Location: Il.

PostPosted: Mon Mar 22, 2010 5:12 pm    Post subject: Reply with quote

Set the car up with the control arms level not up hill like that and they should stay in

Ben Giles
Qusac10@aol.com
Back to top
View user's profile Send private message Send e-mail
Author Message
alport78



Joined: 30 Nov 2009
Posts: 13

PostPosted: Tue Mar 23, 2010 8:28 am    Post subject: Reply with quote

What should the arm level in comparison with the ground? totally flat?
Back to top
View user's profile Send private message
Author Message
Ben Giles



Joined: 31 Aug 2008
Posts: 22
Location: Il.

PostPosted: Tue Mar 23, 2010 10:34 am    Post subject: Reply with quote

Yes flat or slightly up hill.

Ben Giles
Qusac10@aol.com
Back to top
View user's profile Send private message Send e-mail
Author Message
alport78



Joined: 30 Nov 2009
Posts: 13

PostPosted: Thu Mar 25, 2010 11:21 am    Post subject: Reply with quote

OK. thanks for the info...
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    OFNA Nitro Talk Back Forum Forum Index -> Hyper 8 & 8.5 Pro & RTR All times are GMT - 9 Hours
Page 1 of 1
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
ofna nitro talk back