FAQ Search Memberlist  Register  Profile P.M. Log in

Hyper 7 Brushless Goto page 1, 2  Next          OFNA Nitro Talk Back Forum Forum Index -> 1:8 Electric SC/Truggy/Buggy View previous topic :: View next topic   Author Message SnoopMaxx Joined: 30 Jul 2009 Posts: 12 Location: Denmark Posted: Mon Aug 24, 2009 9:23 am    Post subject: Hyper 7 Brushless My Hyper 7 Brushless ready for testing Back to top Author Message sjbwhite20@bellsouth.net Joined: 16 Jun 2009 Posts: 25 Location: 20 SMOKE Posted: Tue Aug 25, 2009 7:14 am    Post subject: what battery tray did you use Back to top Author Message SnoopMaxx Joined: 30 Jul 2009 Posts: 12 Location: Denmark Posted: Tue Aug 25, 2009 11:57 am    Post subject: It's a front cover protector from a Panasonic car stereo I fit's perfect You can get battery trays from RC-Monster Back to top Author Message SnoopMaxx Joined: 30 Jul 2009 Posts: 12 Location: Denmark Posted: Thu Aug 27, 2009 1:19 pm    Post subject: Here's a short video Brushless Hyper 7 Drift c",) Back to top Author Message BondoHyperNutz Joined: 28 Aug 2009 Posts: 18 Location: St pete Fl. Posted: Sat Aug 29, 2009 2:49 am    Post subject: The kid was cute,she was happy How's the little VXL holding up, arent the temps high ?? Back to top Author Message SnoopMaxx Joined: 30 Jul 2009 Posts: 12 Location: Denmark Posted: Sat Aug 29, 2009 2:58 am    Post subject: Yes a little high I use a 16T pinion but may go down to a 14T And the VXL will get a fan or two in the near future Until I get a bigger BL set this will have to do I'm looking at either the Mtroniks 1/8 or the Ez-Run c3 and c4 combos Back to top Author Message BondoHyperNutz Joined: 28 Aug 2009 Posts: 18 Location: St pete Fl. Posted: Sat Aug 29, 2009 7:32 am    Post subject: I hope for your sake you get somthing soon, The VXL will not last long draggin all the extra weight around. It's system capacity is maxxed out pushing anything more 6lbs. Back to top Author Message SnoopMaxx Joined: 30 Jul 2009 Posts: 12 Location: Denmark Posted: Sun Aug 30, 2009 12:49 pm    Post subject: 15 Foot Jump with Hyper 7 VXL Back to top Author Message SnoopMaxx Joined: 30 Jul 2009 Posts: 12 Location: Denmark Posted: Sat Oct 03, 2009 7:31 am    Post subject: New 55mm longer chassis to fit the SC8 body Back to top Author Message sjbwhite20@bellsouth.net Joined: 16 Jun 2009 Posts: 25 Location: 20 SMOKE Posted: Sat Oct 03, 2009 7:46 am    Post subject: what motor mount did you use in the first pic thats different but one thing is did you bend the front of the chassis to get some of the kickup back Back to top Author Message SnoopMaxx Joined: 30 Jul 2009 Posts: 12 Location: Denmark Posted: Sat Oct 03, 2009 10:10 am    Post subject: I was at the machine shop and got the sides and kick-up bend to match the standard Hyper 7 chassis 5mm thick chassis with a custom length rear drive shaft 3mm thick chassis Front Kick-up I made the motor mount from a piece of angle alloy 40x40x4 mm x 85mm long It's very difficult to see the extended drive shaft under the antenna If you want I'll get a better photo later c",) Back to top Author Message sjbwhite20@bellsouth.net Joined: 16 Jun 2009 Posts: 25 Location: 20 SMOKE Posted: Sat Oct 03, 2009 12:39 pm    Post subject: no need just some as you get all done,looks good though Back to top Author Message SnoopMaxx Joined: 30 Jul 2009 Posts: 12 Location: Denmark Posted: Thu Dec 17, 2009 11:44 am    Post subject: The chassis is all done and I got an early x-mass present Mtroniks G2 Beast combo with a 3000kv motor 375mm WB I just had to test it in the snow The video is a little dark 'cos I could not wait 1/8th Hyper 7 Short Course with G2 Beast http://www.youtube.com/watch?v=cEEH9QCzogo Back to top Author Message SnoopMaxx Joined: 30 Jul 2009 Posts: 12 Location: Denmark Posted: Tue Dec 29, 2009 7:19 am    Post subject: Here's my Brushless Hyper 7 in the snow Mtroniks G2P2Beast 3000kv combo with 2s LiPo Not much snow inside And a video 1/8th Brushless HoBao Hyper 7 Snow Fun Back to top Author Message SnoopMaxx Joined: 30 Jul 2009 Posts: 12 Location: Denmark Posted: Fri May 21, 2010 8:46 am    Post subject: My latest Chassis with 332mm wb Just need to get new drive shaft's welded up and buy new batteries This time I used an Ansmann batt box the box alone is only $6.75us Back to top Display posts from previous: All Posts1 Day7 Days2 Weeks1 Month3 Months6 Months1 Year Oldest FirstNewest First         OFNA Nitro Talk Back Forum Forum Index -> 1:8 Electric SC/Truggy/Buggy All times are GMT - 9 Hours Goto page 1, 2  Next Page 1 of 2 Jump to: Select a forum OFNA COMMUNITY----------------General DiscussionFavorite Racing & Bashing SpotsPositive OFNA FeedbackJobs At OFNA OFNA ELECTRIC ON-ROAD----------------On-Road Lounge1:10 Electric Sedan1:8 Electric SedanBrushless Motors & ESC Info OFNA ELECTRIC OFF-ROAD----------------Off-Road LoungeJammin 1:10 Electric SCHyper 1:10 Electric SC1:8 Electric SC/Truggy/BuggyBrushless Motors & ESC info OFNA NITRO ON-ROAD----------------On-Road LoungeDM-ONE & GTPHyper One SevenHyper GPX4CD3LD3 OFNA NITRO ENGINES----------------Engine LoungeHyper EnginesPicco EnginesForce EnginesJL Engines OFNA NITRO OFF-ROAD----------------Off-Road LoungeHyper Short Course NitroHyper 9 ProHyper 8 & 8.5 Pro & RTRHyper ST TruggyHyper 7Jammin Buggy & Truggy/Mini Pro & RTRUltra MBX Comp SeriesMutilator TruggyDirt OvalUltra LX SeriesRavager9.5 Buggy SeriesBlazer SSTTitanMonster Pirate OFNA PIT TIPS LIBRARY----------------OFNA Pit Tips  You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum