 |
 |
 |
 |
 |
| Author |
Message |
Chris71
Joined: 24 Jul 2010 Posts: 9 Location: Wolfenbüttel/ Germany
|
Posted: Wed Jul 28, 2010 8:11 pm Post subject: |
|
|
| @ Felipe, do you use the original clutch with different spring? Chris |
|
| Back to top |
|
|
 |
 |
 |
 |
 |
 |
 |
 |
| Author |
Message |
Felipe
Joined: 05 Apr 2006 Posts: 470 Location: Winter Haven FL
|
Posted: Thu Jul 29, 2010 1:45 pm Post subject: |
|
|
| I use the vp-pro clucth |
|
| Back to top |
|
|
 |
 |
 |
 |
 |
 |
 |
 |
| Author |
Message |
Chris71
Joined: 24 Jul 2010 Posts: 9 Location: Wolfenbüttel/ Germany
|
Posted: Sat Jul 31, 2010 8:46 am Post subject: |
|
|
@ easyrider! You are the man!
I tested 3x1.5 + 3x1.6 with 50 WT Asso oil and white springs. Then i go to grey springs around the car and it`s pretty! I ever think that i must use thinner oil when the track is bumby, but now i use thicker oil and i`t so easy to drive.
Now the car is good in the bumpy area, top in the slow corners and now i need more grip at the front, because i can drive the corners with speed and throttle.! :-)
Tommorow i will test the 8 x1.5 holes in all shocks with 50 wt oil.
Diffs 7000, 7000, 5000. tommorow i will test 10000, 10000, 5000.
The clutch was a Reckward speed 2.5 with 1.1 springs and alu. It`s to hard to drive at the slippery track and i think i will test the "felipe" way with one 0.9 ans two 1.0 springs! :-)
I drive in the rear the 3 toe in plate and i think i will test the 3.5 tomorrow and i hope i can go faster out off the corners.
Chris |
|
| Back to top |
|
|
 |
 |
 |
 |
 |
 |
 |
 |
| Author |
Message |
easyryder
Joined: 15 Oct 2007 Posts: 159 Location: Tucson, AZ
|
Posted: Sat Jul 31, 2010 9:22 am Post subject: |
|
|
| Nice, its wierd, but i always seem to run heavy wt oils in the shocks, go have more good times! |
|
| Back to top |
|
|
 |
 |
 |
 |
 |
 |
 |
 |
| Author |
Message |
Chris71
Joined: 24 Jul 2010 Posts: 9 Location: Wolfenbüttel/ Germany
|
Posted: Wed Aug 04, 2010 3:10 am Post subject: |
|
|
Hi all!
I have Seen that JK use Jammin SHOCKS. Is there a big Differenz between the 16mm big bore and the17/20mm hobao big bore shocks? |
|
| Back to top |
|
|
 |
 |
 |
 |
 |
 |
 |
 |
| Author |
Message |
Arushmen
Joined: 13 Jan 2009 Posts: 19
|
Posted: Wed Aug 04, 2010 5:21 pm Post subject: |
|
|
Hi Everybody
I would like to know the correct order about 17 ofna shock spring
Blue= soft
Grey= medium
white= hard
is this correct?
Thanks in advance |
|
| Back to top |
|
|
 |
 |
 |
 |
 |
 |
 |
 |
| Author |
Message |
David S.
Joined: 04 Apr 2008 Posts: 374
|
Posted: Thu Aug 05, 2010 6:36 am Post subject: |
|
|
29111..........Blue/soft
29125..........White/med
29126...........Gray/hard |
|
| Back to top |
|
|
 |
 |
 |
 |
 |
 |
 |
 |
| Author |
Message |
Arushmen
Joined: 13 Jan 2009 Posts: 19
|
Posted: Thu Aug 05, 2010 6:54 am Post subject: |
|
|
Thanks a lot
| David S. wrote: |
29111..........Blue/soft
29125..........White/med
29126...........Gray/hard |
|
|
| Back to top |
|
|
 |
 |
 |
 |
 |
 |
 |
 |
| Author |
Message |
MLCG4s
Joined: 12 Dec 2006 Posts: 19 Location: Cyprus
|
Posted: Tue Jan 11, 2011 10:54 am Post subject: |
|
|
need your help if its possible to help me ,this is my Hyper 9 setup and im actually have some issues and i cant solve them out
Front :
Shock oil 45wt ultimate
suspension spring blue
tower shock position 1(inner)
Antiroll bar 2.4mm
Differential oil 7000 ultimate
Ackerman medium
shock piston holes 4 std
toe-in 1.5 dec
camber 2 dec
link tower position 2(lower)
link hub position 1(inner)
bump steer lower
C hub 24 dec
center:
diff oil 5000 ultimate
diff gear 40T
clutch bell 14 T
engine torro nero
engine mount 20 dec
fuel byron 30%
pipe 9901
Rear:
Shock oil 40wt Ultimate
suspension spring blue
Tower shock position 2(inner)
Arm sock position 2(outer)
Toe in 3 dec
Camber 2 dec
Antiroll bar 2.3mm
Differential oil 3000 Ultimate
Shock piston holes 4 std
antisquad 3dec(up)
link tower position 3(inner lower)
link Hub position 2(upper outer)
Hub position 2
i hope that is all :)
the problem i have is that the car is unpredictable unstable rear when i race on bumps and on corner exits the rear have the tendency to drift on throttle , but also when is on mid corner either im using full throttle for a high speed turn or half throttle on a medium turn it flips. when im using the half throttle on bumps or small jumps the rear hops a lot like a kangaroo :D
the track is hard packed, bumpy a lot , tight , sharp corners small straights , some small jumps and some biig jumps.
thanks :) |
|
| Back to top |
|
|
 |
 |
 |
 |
 |
 |
 |
 |
| Author |
Message |
Felipe
Joined: 05 Apr 2006 Posts: 470 Location: Winter Haven FL
|
Posted: Tue Jan 11, 2011 3:04 pm Post subject: |
|
|
| MLCG4s wrote: |
need your help if its possible to help me ,this is my Hyper 9 setup and im actually have some issues and i cant solve them out
Front :
Shock oil 45wt ultimate
suspension spring blue
tower shock position 1(inner)
Antiroll bar 2.4mm
Differential oil 7000 ultimate
Ackerman medium
shock piston holes 4 std
toe-in 1.5 dec
camber 2 dec
link tower position 2(lower)
link hub position 1(inner)
bump steer lower
C hub 24 dec
center:
diff oil 5000 ultimate
diff gear 40T
clutch bell 14 T
engine torro nero
engine mount 20 dec
fuel byron 30%
pipe 9901
Rear:
Shock oil 40wt Ultimate
suspension spring blue
Tower shock position 2(inner)
Arm sock position 2(outer)
Toe in 3 dec
Camber 2 dec
Antiroll bar 2.3mm
Differential oil 3000 Ultimate
Shock piston holes 4 std
antisquad 3dec(up)
link tower position 3(inner lower)
link Hub position 2(upper outer)
Hub position 2
i hope that is all :)
the problem i have is that the car is unpredictable unstable rear when i race on bumps and on corner exits the rear have the tendency to drift on throttle , but also when is on mid corner either im using full throttle for a high speed turn or half throttle on a medium turn it flips. when im using the half throttle on bumps or small jumps the rear hops a lot like a kangaroo :D
the track is hard packed, bumpy a lot , tight , sharp corners small straights , some small jumps and some biig jumps.
thanks :) |
lower your antisquad to 2 deg(middle) and limit your droop set the front dog bones w/half a tank to level. hope this help let me know and maybe use the 20 deg front hubs. |
|
| Back to top |
|
|
 |
 |
 |
 |
 |
 |
 |
 |
| Author |
Message |
MLCG4s
Joined: 12 Dec 2006 Posts: 19 Location: Cyprus
|
Posted: Wed Jan 12, 2011 9:43 am Post subject: |
|
|
thanks fellipe for your advice..i allready test it seem to be less unpredictable but still drifts and flips
p.s. i changed also the c hubs to 20dec |
|
| Back to top |
|
|
 |
 |
 |
 |
 |
 |
 |
 |
| Author |
Message |
Felipe
Joined: 05 Apr 2006 Posts: 470 Location: Winter Haven FL
|
Posted: Wed Jan 12, 2011 4:05 pm Post subject: |
|
|
| change your rear sway bar im running the 2.6mm in my car sounds like your traction rolling.also try 35 or 32.5 in the rear shocks. i run blue up front and white in the back. |
|
| Back to top |
|
|
 |
 |
 |
 |
 |
 |
 |
 |
| Author |
Message |
MLCG4s
Joined: 12 Dec 2006 Posts: 19 Location: Cyprus
|
Posted: Fri Jan 14, 2011 9:27 am Post subject: |
|
|
i used to use 2.8mm on the rear but it was worst.... anyway i go for it tomorrow and i let you know...
thanks again |
|
| Back to top |
|
|
 |
 |
 |
 |
 |
 |
 |
 |
| Author |
Message |
Felipe
Joined: 05 Apr 2006 Posts: 470 Location: Winter Haven FL
|
Posted: Fri Jan 14, 2011 2:45 pm Post subject: |
|
|
| ok. |
|
| Back to top |
|
|
 |
 |
 |
 |
 |
 |
 |
 |
| Author |
Message |
cappy
Joined: 14 Jan 2011 Posts: 6
|
Posted: Fri Jan 14, 2011 3:00 pm Post subject: Clutch setups |
|
|
Hey guys !! New Hobao driver here. Migrated over from Losi just to give something new a try. What do we have here for info in the clutch shoe a springs setup department ?
I had a setup for my Losi that was all me. I just loved the way it felt. I'm looking for that same feel with this car or as close as i can get. |
|
| Back to top |
|
|
 |
 |
 |
 |
 |
 |
 |
 |
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|
 |
 |
 |
 |
|
 |