 |
 |
|
 |
|
| Author |
Message |
vad
Joined: 02 Feb 2006
Posts: 101
|
 Posted: Tue Oct 24, 2006 9:42 pm Post subject: dm-one - Setup |
 |
|
Can anyone suggest a good starting set up for the DM-1.
Camber
Caster
Wheel base
Track width
Ride height
If there is anything forgotten please add. |
|
| Back to top |
|
|
|
 |
|
 |
|
|
|
|
| Author |
Message |
Dreamcatcher
Joined: 07 Dec 2006
Posts: 5
Location: N.Y.
|
| Posted: Tue Dec 12, 2006 2:11 am Post subject: |
|
|
Hello, I just finisned building my DM-1 does any one have any set ups for the car like rear toe, Width, Caster and So on. The help would realy be appreciated.
Thanks,
J.C. |
|
| Back to top |
|
|
|
|
|
|
|
|
|
|
| Author |
Message |
DJ
Joined: 22 Jun 2006
Posts: 979
|
| Posted: Tue Dec 12, 2006 11:05 am Post subject: |
|
|
front shocks 1000 wt. (diff oil)
rear shocks 80 wt.
yellow spring front 40740
white spring rear 40739
front camber 2 degrees
rear camber 3.5 degrees
front toe neg 1
rear toe 2
roll center inside upper front and rear
100,000 front diff.
30,000 rear diff.
7mm ride ht frnt.
8mm ride ht rear
front sway bar almost 90degrees
no sway bar rear
that's all I can think of right now |
|
| Back to top |
|
|
|
|
|
|
|
|
|
|
| Author |
Message |
Dreamcatcher
Joined: 07 Dec 2006
Posts: 5
Location: N.Y.
|
| Posted: Tue Dec 12, 2006 4:10 pm Post subject: |
|
|
| Appreciate it very much! Thanks! |
|
| Back to top |
|
|
|
|
|
|
|
|
|
|
| Author |
Message |
cr4sh_27
Joined: 21 Jul 2007
Posts: 9
|
| Posted: Sat Jul 28, 2007 10:05 am Post subject: |
|
|
| DJ wrote: |
front shocks 1000 wt. (diff oil)
rear shocks 80 wt.
yellow spring front 40740
white spring rear 40739
front camber 2 degrees
rear camber 3.5 degrees
front toe neg 1
rear toe 2
roll center inside upper front and rear
100,000 front diff.
30,000 rear diff.
7mm ride ht frnt.
8mm ride ht rear
front sway bar almost 90degrees
no sway bar rear
that's all I can think of right now |
is this what set-up you are using? if so, is it track specific or a general set-up? |
|
| Back to top |
|
|
|
|
|
|
|
|
|
|
| Author |
Message |
pretenderddr
Joined: 31 Mar 2008
Posts: 2
|
| Posted: Mon Mar 31, 2008 5:37 pm Post subject: |
|
|
| does the car need droop? |
|
| Back to top |
|
|
|
|
|
|
|
|
|
|
| Author |
Message |
BillDeLong
Joined: 24 Oct 2012
Posts: 5
|
| Posted: Wed Oct 24, 2012 4:43 am Post subject: |
|
|
| pretenderddr wrote: |
| does the car need droop? |
I see holes for droop screws but no plate for them to bite into, so how do you adjust the droop? |
|
| Back to top |
|
|
|
|
|
|
|
|
|
|
| Author |
Message |
David S.
Joined: 04 Apr 2008
Posts: 375
|
| Posted: Wed Oct 24, 2012 6:05 am Post subject: |
|
|
| Adjust the droop (down stops) at the swat bar mounts. The adjustment is similar to the front adjustment of a 1/8 open car. |
|
| Back to top |
|
|
|
|
|
|
|
|
|
|
| Author |
Message |
BillDeLong
Joined: 24 Oct 2012
Posts: 5
|
| Posted: Wed Oct 24, 2012 7:10 am Post subject: |
|
|
| Thanks, I just raced this car for the first time this past weekend and I've got a lot to learn about it! |
|
| Back to top |
|
|
|
|
|
|
|
|
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
|
|
|
|
|
FAQ 
Search 
Memberlist
Register
Profile 
P.M. 
Log in
