6sharky9
Joined: 15 May 2012
Posts: 16
Location: Alabama
|
 Posted: Tue May 15, 2012 3:35 pm Post subject: |
 |
|
| im sure you can find the recommended plug through OFNA....as far as it not starting that can be many issues..1st make sure your glow ignitor is working properly..you can remove your plug and attacj it to the ignitor to see if it glows..even if it does glow that doesnt mean its enough to make it start...it need to be a very bright orange glow...2nd is make sure you prime the motor to be sure you have fuel to the carburetor..you simply place your finger over the exhaust tip to force fuel to your motor...3rd..if you are getting fuel you may have flooded the motor in which case it can saturate the plug with fuel making it not start..other things can be air leaks or just a bad piston and sleeve..i dont know the condition of the motor or if it was broken in properly so not much to say on that really..try the first 3 i mentioned and if it still doesnt run i dont know really what to say about it. |
|
FAQ 
Search 
Memberlist
Register
Profile 
P.M. 
Log in
