OFNA Nitro Talk Back Forum :: View topic



	FAQ Search Memberlist Register Profile P.M. Log in

HSN Seal Problem

OFNA Nitro Talk Back Forum Forum Index -> Hyper 7

View previous topic :: View next topic

Author

Message

LxThexKingxB

Joined: 31 Jan 2010
Posts: 7

Posted: Sun Jun 05, 2011 4:29 am Post subject: HSN Seal Problem

having a problem with my hsn backing itself out while driving the car. just wondering if i could get a O ring from the hardware store since i ordered the main housing from my local hobby store and i told them what the problem was and i didnt know that the needle and seal was separate.(LHS SUX) Thanx in advance for any help!!!!!!

Author

Message

LxThexKingxB

Joined: 31 Jan 2010
Posts: 7

Posted: Sun Jun 05, 2011 4:41 am Post subject:

and size if possible

Author

Message

VWVR6_T

Joined: 23 Aug 2009
Posts: 384
Location: Western, PA

Posted: Sun Jun 12, 2011 9:29 pm Post subject:

Take the o-ring out and go to any auto parts i'm sure that almost any auto parts carry o-rings.

Author

Message

RobB

Joined: 09 Dec 2005
Posts: 263
Location: Lake Forest, CA.

Posted: Sun Jun 19, 2011 7:20 pm Post subject:

I'd call Nitrohouse first and get what is spec'ed for the engine. Ofna sells just the o'rings for any Ofna engine. You'll probably spend hours going from Hardware store to store trying to find one that will fit properly, and if it's not for high temps it'll melt in the needle housing. If it's for the MacStar or Hyper engines here's a link... http://www.nitrohouse.com/Engine-Parts-Hyper-Hyper-.28-Mach-w/Pull/c34_134_218/p13178/SEAL-SET-COMPLETE,-CARB/product_info.html Hope this helps...

Display posts from previous:

	OFNA Nitro Talk Back Forum Forum Index -> Hyper 7	All times are GMT - 9 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum