FAQ Search Memberlist  Register  Profile P.M. Log in

Hyper 7 black break in          OFNA Nitro Talk Back Forum Forum Index -> Hyper 7 View previous topic :: View next topic   Author Message dhsa7 Joined: 13 Sep 2010 Posts: 4 Location: san antonio tx Posted: Mon Sep 13, 2010 4:21 pm    Post subject: Hyper 7 black break in I have a hyper 7 black with the macstar 28 coming in the mail at the end of the week and I wanted to know if there were any recommendations on how to break it in. Iv'e heard the instructions don't go over it. I have had a nitro car in the past so I know how to tune but it was used so I have never broken in a new motor. Thanks Back to top Author Message VWVR6_T Joined: 23 Aug 2009 Posts: 384 Location: Western, PA Posted: Mon Sep 13, 2010 6:59 pm    Post subject: Go to this link http://ofna.com/forum/viewtopic.php?t=3 you can used that system. Good luck Back to top Author Message dhsa7 Joined: 13 Sep 2010 Posts: 4 Location: san antonio tx Posted: Tue Sep 14, 2010 5:17 pm    Post subject: Thats what I was looking for. Thanks Back to top Author Message VWVR6_T Joined: 23 Aug 2009 Posts: 384 Location: Western, PA Posted: Tue Sep 14, 2010 9:06 pm    Post subject: Back to top Author Message dhsa7 Joined: 13 Sep 2010 Posts: 4 Location: san antonio tx Posted: Thu Sep 16, 2010 6:32 pm    Post subject: Also do you know the default needle settings for the macstar? Or at least a starting point where I should have them? Back to top Author Message redlined_b16a Joined: 29 Jun 2008 Posts: 91 Posted: Fri Sep 17, 2010 1:55 am    Post subject: My Mac wouldn't attempt to start until I closed the hsn to 3.5 turns out,the Mac is different from the .21 instructions provided Back to top Author Message VWVR6_T Joined: 23 Aug 2009 Posts: 384 Location: Western, PA Posted: Fri Sep 17, 2010 8:43 pm    Post subject: dhsa7 wrote: Also do you know the default needle settings for the macstar? Or at least a starting point where I should have them? Put the needles flush with the housing, both of them. Back to top Display posts from previous: All Posts1 Day7 Days2 Weeks1 Month3 Months6 Months1 Year Oldest FirstNewest First         OFNA Nitro Talk Back Forum Forum Index -> Hyper 7 All times are GMT - 9 Hours Page 1 of 1 Jump to: Select a forum OFNA COMMUNITY----------------General DiscussionFavorite Racing & Bashing SpotsPositive OFNA FeedbackJobs At OFNA OFNA ELECTRIC ON-ROAD----------------On-Road Lounge1:10 Electric Sedan1:8 Electric SedanBrushless Motors & ESC Info OFNA ELECTRIC OFF-ROAD----------------Off-Road LoungeJammin 1:10 Electric SCHyper 1:10 Electric SC1:8 Electric SC/Truggy/BuggyBrushless Motors & ESC info OFNA NITRO ON-ROAD----------------On-Road LoungeDM-ONE & GTPHyper One SevenHyper GPX4CD3LD3 OFNA NITRO ENGINES----------------Engine LoungeHyper EnginesPicco EnginesForce EnginesJL Engines OFNA NITRO OFF-ROAD----------------Off-Road LoungeHyper Short Course NitroHyper 9 ProHyper 8 & 8.5 Pro & RTRHyper ST TruggyHyper 7Jammin Buggy & Truggy/Mini Pro & RTRUltra MBX Comp SeriesMutilator TruggyDirt OvalUltra LX SeriesRavager9.5 Buggy SeriesBlazer SSTTitanMonster Pirate OFNA PIT TIPS LIBRARY----------------OFNA Pit Tips  You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum