FAQFAQ SearchSearch MemberlistMemberlist  RegisterRegister  ProfileProfile Log in to check your private messagesP.M. Log inLog in
TITAN Engine Moving

 
Post new topic   Reply to topic    OFNA Nitro Talk Back Forum Forum Index -> Titan
View previous topic :: View next topic  

Author Message
cars12345



Joined: 15 Feb 2010
Posts: 2
PostPosted: Mon Feb 15, 2010 8:14 am    Post subject: TITAN Engine Moving Reply with quote
I am currently rebuilding a twin titan and I am running the truck with only one engine to see if the engines are good but the engine keeps moving just enough to mess up the gear mesh. It keeps doing it no matter how tight I put the screws in.

any advise?
Back to top
View user's profile Send private message
Author Message
ofna- canadian



Joined: 03 Jun 2008
Posts: 60
Location: Kamloops British Columbia Canada
PostPosted: Mon Feb 15, 2010 4:11 pm    Post subject: Reply with quote
Is the motor moving on the motor mount, or is the motor mount moving on the chassis?
Back to top
View user's profile Send private message
Author Message
cars12345



Joined: 15 Feb 2010
Posts: 2
PostPosted: Tue Feb 16, 2010 9:34 am    Post subject: Reply with quote
the motor is moving on the chassis
Back to top
View user's profile Send private message
Author Message
ofna- canadian



Joined: 03 Jun 2008
Posts: 60
Location: Kamloops British Columbia Canada
PostPosted: Tue Feb 16, 2010 4:09 pm    Post subject: Reply with quote
Maybe the bolts are a little bit too long and are bottoming out before the head is gripping the chassis, try putting a serrated washer under the head of each bolt and use blue locktite on the bolts
Back to top
View user's profile Send private message
Author Message
Two Stroked



Joined: 18 Feb 2006
Posts: 26
Location: so cal
PostPosted: Wed Feb 17, 2010 5:58 pm    Post subject: Reply with quote
for sure something goin on.. Ive beat the crap out of my twin at the track and never had either engine move...Now its almost impossible to get the mesh perfect if it has the stock two speed.
Back to top
View user's profile Send private message
Author Message
0700



Joined: 25 Nov 2005
Posts: 118
Location: Boise, ID
PostPosted: Sat Sep 11, 2010 1:11 pm    Post subject: Reply with quote
Use bolts instead the 3mm allen head screws provided. Ofna sells them as, they have 8mm head installed of allen screw.
Back to top
View user's profile Send private message Send e-mail
Display posts from previous:   
Post new topic   Reply to topic    OFNA Nitro Talk Back Forum Forum Index -> Titan All times are GMT - 9 Hours
Page 1 of 1
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
ofna nitro talk back