FAQFAQ SearchSearch MemberlistMemberlist  RegisterRegister  ProfileProfile Log in to check your private messagesP.M. Log inLog in
what ceramic bearings to use for a picco .28

 
Post new topic   Reply to topic    OFNA Nitro Talk Back Forum Forum Index -> Picco Engines
View previous topic :: View next topic  

Author Message
hondaguy



Joined: 27 Sep 2009
Posts: 19
PostPosted: Wed Mar 31, 2010 6:31 pm    Post subject: what ceramic bearings to use for a picco .28 Reply with quote
hey guys i have a picco .28 new stlye head. i was woundering what ceramic bearings should i get. the engine is got a half gallon burn threw it and after a run there is oil/fuel on the bottom of the case. i test for air leaks bt i cant get any bubbles form the front bearing. maybe its got to be hot for it to leak.
Back to top
View user's profile Send private message Send e-mail
Author Message
nitro_79



Joined: 24 Mar 2010
Posts: 18
Location: Indianapolis, Indiana
PostPosted: Thu Apr 01, 2010 4:13 pm    Post subject: Reply with quote
I use the boca bearings, the front bearing is packed with grease so it is sealed up on both sides. Just have your measurements handy and go to their web page. I just put one in my picco 26 I think the front was about $25.
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    OFNA Nitro Talk Back Forum Forum Index -> Picco Engines All times are GMT - 9 Hours
Page 1 of 1
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
ofna nitro talk back