blue byou racing
Joined: 13 Oct 2009
Posts: 22
Location: central florida
|
 Posted: Mon Oct 26, 2009 5:52 am Post subject: |
 |
|
| I pulled the tank, removed the cap, flushed it out,plugged the holes, pressurized it with 10 lbs of air and gently heated the sides of the tank.Stay away from the top of the tank with the heat! The trick is warm it slowly and evenly, holding it by the air hose. Too hot too fast will blow holes(I trashed the first one) But picked up maybe 10-15 more cc on the second one. Do this to the ofna ultra or gtp 145 cc tank, mounting post. I think you might have to drill 1 or 2 new holes in the chassie plate |
|
FAQ 
Search 
Memberlist
Register
Profile 
P.M. 
Log in
