FAQ Search Memberlist  Register  Profile P.M. Log in

Hyper 8 Race Rear Bearing Size          OFNA Nitro Talk Back Forum Forum Index -> Hyper Engines View previous topic :: View next topic   Author Message biggame Joined: 19 Nov 2008 Posts: 4 Posted: Fri Dec 12, 2008 3:07 pm    Post subject: Hyper 8 Race Rear Bearing Size I'm looking in the exploded view for the Hyper 8 Port Engines. It says the rear bearing is 14x24x6 in the race model. I purchased one of these and it is too small. What gives??? What other size bearings work with this motor??? 25.4 like an OS? Thanks, James Back to top Author Message Buggin Joined: 23 Jul 2007 Posts: 447 Posted: Sat Dec 13, 2008 7:21 pm    Post subject: Re: Hyper 8 Race Rear Bearing Size biggame wrote: I'm looking in the exploded view for the Hyper 8 Port Engines. It says the rear bearing is 14x24x6 in the race model. I purchased one of these and it is too small. What gives??? What other size bearings work with this motor??? 25.4 like an OS? Thanks, James I pulled out my manual for the Hyper.21 and the parts break down also states the rear bearing size for the 8 port pro is a 14x24x6. Do you have a set of calipers you can measure your old one with? If you don't, I am sure your lhs would. Back to top Author Message MotionMachine999 Joined: 20 Oct 2005 Posts: 1714 Location: Land of Oz Posted: Sun Dec 14, 2008 10:14 am    Post subject: Re: Hyper 8 Race Rear Bearing Size biggame wrote: I'm looking in the exploded view for the Hyper 8 Port Engines. It says the rear bearing is 14x24x6 in the race model. I purchased one of these and it is too small. What gives??? What other size bearings work with this motor??? 25.4 like an OS? Thanks, James Sounds like you got the rear bearing for a Hyper .21 8 port (53213), part# 53013- Bearing 13X24X6mm. May be packaged wrong??? Your looking for part # 53029- Bearing, 14X24X6mm (hyper Race) Back to top Author Message biggame Joined: 19 Nov 2008 Posts: 4 Posted: Mon Dec 15, 2008 8:04 am    Post subject: Nope, it is a 14x25x6 for sure. The bearing is just about the same size as my OS bearing that is 25.4. Freaky how they are inconsistent like that. James Back to top Author Message MHTSOS Joined: 06 Jun 2009 Posts: 3 Posted: Sat Dec 12, 2009 6:37 am    Post subject: Biggame is wright. I have bought a ceramic bearing for my Hyper 21 Race and I got a 14x24x6 mm as the manual said. But when I put the new one in it is too small. I measured the old bearing and it is 14x25x6 mm. So now I have a ceramic bearing that is useless to me . And I don't know any other engine that is using this size of bearing. Back to top Display posts from previous: All Posts1 Day7 Days2 Weeks1 Month3 Months6 Months1 Year Oldest FirstNewest First         OFNA Nitro Talk Back Forum Forum Index -> Hyper Engines All times are GMT - 9 Hours Page 1 of 1 Jump to: Select a forum OFNA COMMUNITY----------------General DiscussionFavorite Racing & Bashing SpotsPositive OFNA FeedbackJobs At OFNA OFNA ELECTRIC ON-ROAD----------------On-Road Lounge1:10 Electric Sedan1:8 Electric SedanBrushless Motors & ESC Info OFNA ELECTRIC OFF-ROAD----------------Off-Road LoungeJammin 1:10 Electric SCHyper 1:10 Electric SC1:8 Electric SC/Truggy/BuggyBrushless Motors & ESC info OFNA NITRO ON-ROAD----------------On-Road LoungeDM-ONE & GTPHyper One SevenHyper GPX4CD3LD3 OFNA NITRO ENGINES----------------Engine LoungeHyper EnginesPicco EnginesForce EnginesJL Engines OFNA NITRO OFF-ROAD----------------Off-Road LoungeHyper Short Course NitroHyper 9 ProHyper 8 & 8.5 Pro & RTRHyper ST TruggyHyper 7Jammin Buggy & Truggy/Mini Pro & RTRUltra MBX Comp SeriesMutilator TruggyDirt OvalUltra LX SeriesRavager9.5 Buggy SeriesBlazer SSTTitanMonster Pirate OFNA PIT TIPS LIBRARY----------------OFNA Pit Tips  You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum