 |
 |
|
 |
|
| Author |
Message |
godzukihop
Joined: 06 Mar 2008
Posts: 11
Location: DE
|
 Posted: Thu Mar 06, 2008 5:47 pm Post subject: GPX4 TRANNY PROBLEM |
 |
|
| Anybody else have the problem of the bearing moving around inside the hi-gear of the tranny, causing the gear to move partial off of the tranny clutch shoes? I loctited the bearing in place hoping this will fix it, any other cures out there? |
|
| Back to top |
|
|
|
 |
|
 |
|
|
|
|
| Author |
Message |
DJ
Joined: 22 Jun 2006
Posts: 979
|
| Posted: Mon Mar 10, 2008 1:40 pm Post subject: |
|
|
| If the ball bearing is shooting over the camshaft, then your tranny is worn. The shoes ,bearing and camshaft have enough wear the set you have on the two speed might be too soft and hit really hard when it shifts causing it to bang into 2nd gear and put a groove on the cam. When the one of these parts are bad you will need to repalce these parts. |
|
| Back to top |
|
|
|
|
|
|
|
|
|
|
| Author |
Message |
godzukihop
Joined: 06 Mar 2008
Posts: 11
Location: DE
|
| Posted: Mon Mar 10, 2008 5:35 pm Post subject: |
|
|
| DJ wrote: |
| If the ball bearing is shooting over the camshaft, then your tranny is worn. The shoes ,bearing and camshaft have enough wear the set you have on the two speed might be too soft and hit really hard when it shifts causing it to bang into 2nd gear and put a groove on the cam. When the one of these parts are bad you will need to repalce these parts. |
The car is brand new. I stated it wrong. The bearing is not moving, but the 2nd gear is sliding towards 1st gear, exposing part of the clutch for the 2speed. |
|
| Back to top |
|
|
|
|
|
|
|
|
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
|
|
|
|
|
FAQ 
Search 
Memberlist
Register
Profile 
P.M. 
Log in
